Powerflex Front Lower Wishbone Rear Bush Kit for Alfa Romeo 156
Front Lower Wishbone Rear Bush
These bushs are designed to fit genuine control arms. If non genuine arms are fitted and you find the stainless steel sleeve not to fit onto the wishbone, please contact us with dimensions of the wishbone pin as you will require modified sleeves. There can be an issue with the pin diameter for PFF1-812 sleeves on non-genuine arms. The genuine arms have a pin diameter of 20mm, the non genuine arms have a pin diameter of 21.3mm. If you have arms with 21.3mm pin for the 812 bush then please telephone and we will send you replacements. PFF1-812 kit also comes with different sized rings. Select the correct ring depending on the rear bracket fitted. Use smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushs after removing the arms from the car. For arms fitted with the pressed steel rear bracket the rubber bush may need to be burned out using a blowtorch, then the bracket cleaned up to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM
This kit includes 2 bush(es). This vehicle requires 2 bush(es). For this specific part, please refer to 2 on the diagram here
Picture for illustration purposes only - actual kit may differ from shown.
AvailabilityMost of our¬†Powerflex products are stocked and ship within 2 working days. To make sure you‚Äôre not hit with unexpected delays, please email us at email@example.com
Shipping and Returns
All car parts are sent via a tracked delivery service or courier, depending on the size and weight of the shipment.
Shipping to the UK can vary depending on manufacturer, but we advise customers to expect delivery of their order within 3-5 working days.
If you aren't happy with your order for whatever reason, you are able to make a return within 30 days of purchase for a full refund. To find out more about our returns policy, visit our returns page
Need advice? Contact us!